Surface Insulation & Sealant

Surface Insulation & Sealant- WPS500

Nano Surface Insulation and Sealant

The protection of various surfaces such as construction materials, flooring, and facades from moisture has always been crucial, and various solutions have been developed to prevent water and moisture infiltration. Nano Surface Insulation and Sealant is a powerful new product based on nano-siloxanes that penetrates deeply into surfaces, offering long-term protection against moisture and water. This sealant can be applied to various surfaces, including concrete, cement, brick, plaster, and more. It is an extremely efficient water-repellent coating for facades, roofs, arched and sloped surfaces, and more. This product is not recommended for use on painted surfaces. One of its best uses is to protect historical and ancient artifacts from water, moisture, and atmospheric agents. An exclusive advantage of this product is that it does not form any film or gloss on surfaces, and it does not alter the color of the surface beneath. In fact, the use of this product ensures absolute waterproofing of the applied surfaces.

In general, this product is a new method of insulation for various surfaces. In construction, it is essential to use the best insulation to minimize damage to buildings caused by weather conditions. This product is more cost-effective than other insulation materials and offers a longer lifespan.

Properties and Special Effects

• Extremely long-lasting durability and stability.
• Absolute waterproofing of applied surfaces.
• Easy application with no need for specialized skills.
• Produced based on nano-technology.
• Highly resistant to destructive atmospheric gases.
• Excellent resistance to water and moisture penetration.
• Easy cleaning of the building facade.
• High resistance to sunlight exposure.
• Dust and soot-repellent on surfaces.
• Self-cleaning properties after rain.
• No change in the color of the applied surfaces.
• No film or gloss formation on the surface.
• Penetrates both old and new surfaces.
• Does not block the breathability of concrete.
• High resistance to chemical agents and chloride ions.

Applications

• Can be used for waterproofing all brick surfaces.
• Suitable for all granite and ceramic facades.
• Can be applied to all cement and concrete facades.
• Suitable for all plaster surfaces.
• Ideal for waterproofing artificial stone surfaces.
• Perfect for waterproofing gypsum panels.
• Can be applied to historical and ancient artifacts for protection against water and moisture.
• Suitable for mosaics and wash concrete surfaces.
• Ideal for waterproofing cement and plaster sculptures.
• Suitable for pre-cast cement elements.

Application Method

The surfaces to be treated with Nano Surface Insulation and Sealant must be completely clean and free from any dirt, dust, or grease. If any contamination is present, it is recommended to clean the surface using high-pressure water (water jet) or sandblasting. Apply the sealant in two layers using a brush, roller, or spray.

Consumption Rate

The exact consumption of this product depends on the surface’s roughness and absorption rate. Typically, one liter of Nano Surface Insulation and Sealant covers 5 to 6 square meters with one coat.

Safety

• In case of eye contact, immediately rinse the affected eye with clean drinking water for 2 minutes.
• This product is not considered toxic or hazardous to humans or the environment.
• Wear suitable protective goggles during application.
• Use a mask and gloves during application.

Storage

• Shelf life: One year in the original packaging.
• Proper storage conditions: Keep away from freezing, excessive heat, and prolonged direct sunlight.
• Ideal storage temperature: Between 10°C and 30°C.

Packaging

• 1-liter bottle