Cement and Efflorescence Remover for Brick

Cement and Efflorescence Remover for Brick

Remove Cement & Efflorescence – From Brick – RCG100

The formation of efflorescence on brick surfaces, especially on exposed brick facades, is a persistent issue that creates an unpleasant appearance. Efflorescence or white deposits on bricks occur because the soluble salts within the porous structure of the brick migrate to the surface with moisture. As the water evaporates, these salts crystallize and remain as a residue. This surface phenomenon not only affects the exterior appearance but also indicates structural weakness, leading to the gradual deterioration of the brick.

The Cement and Efflorescence Remover for Brick is a specialized product formulated with non-toxic acids and nanotechnology. In addition to removing efflorescence, it effectively cleans cement residues and mortar stains left on brick surfaces after grouting. This cement solvent is particularly effective for removing aged efflorescence, which cannot be easily cleaned with water or sandblasting. The application of this product requires no specific skill or expertise and can be performed easily.

Efflorescence on bricks is essentially water-soluble salts that, during the brick installation process, precipitate on the surface due to water evaporation. This phenomenon, known as brick efflorescence, typically appears during or shortly after construction. Therefore, removing cement residues and salt deposits is essential for maintaining the aesthetic and structural integrity of brickwork. The best cement and efflorescence remover is offered by Beton Plast Chemical Company.

Key Features and Benefits

• Easy application with no need for special skills or expertise
• No toxic fumes or unpleasant odors
• Does not alter the color of the underlying brick layer
• Safe for humans and the environment
• Breaks the molecular bonds of all cement-based mortars without corroding the brick or other materials

Applications

• Removes cement residues and grout stains from bricks
• Eliminates efflorescence and white deposits from all types of bricks
• Suitable for washing and cleaning brick facades of buildings

Usage Instructions

1. Pre-wet the brick surface using a water spray.
2. Apply the solution to the surface using a brush or spray.
3. Keep the treated area moist by spraying water periodically for 20 to 30 minutes. The surface must remain wet throughout the process.
4. Avoid application in extreme weather conditions, such as excessive heat, direct sunlight, or strong winds, as the solution may dry too quickly.
5. If the solution starts to dry, mix it with twice its volume of water and reapply to the surface.
6. Rinse the surface with water under pressure to remove residues.

Consumption Rate

The required amount of Cement and Efflorescence Remover depends on the severity of the efflorescence and cement residues present on the brick surface.

Safety Precautions

• In case of eye contact, immediately rinse with clean drinking water for two minutes, blinking frequently, and seek medical attention.
• Wear protective goggles while using the product.
• Use gloves and a mask when handling the solution.
• This product is not classified as hazardous for the environment.
• Do not store in metal containers, as it may react with metal surfaces.

Storage

• Shelf Life: 1 year in its original packaging
• Storage Conditions: Keep away from frost, extreme heat, and prolonged direct sunlight
• Optimal Storage Temperature: +10°C to +30°C

Packaging

• 1-liter plastic bottle