X100 Nano Waterproofing Adhesive

X100 Nano Waterproofing Adhesive

X100 Waterproofing Resin for Concrete

Description: X100 Nano-Based Concrete Waterproofing Adhesive

X100 Waterproofing Adhesive is a highly effective and powerful solution for sealing concrete or mortar. It is formulated with latex and nanotechnology, making it a versatile material in the insulation industry with exceptional waterproofing properties. This nano-based acrylic resin penetrates deep into the structure, forming an impermeable barrier against water and moisture while allowing structural breathability. It effectively withstands both positive and negative hydrostatic pressures. The adhesive appears white or milky but turns completely transparent once dried.

X100 Waterproofing Adhesive not only provides surface waterproofing but also integrates into concrete mixtures, ensuring comprehensive structural waterproofing. It is widely used in concrete repairs, surface restoration, and as an additive in various slurry mixtures. This product, when mixed with designed mortars, serves as an excellent replacement for traditional waterproofing methods like bitumen and membrane coatings. Additionally, it is easy to apply using a brush or spray gun.

Mechanism of Action of X100 Nano Waterproofing Adhesive

When mixed with concrete, X100 enhances the rheological properties of fresh concrete while improving the adhesion between its components. Upon drying, it forms a hard polymer within the voids between aggregates, increasing density and cohesion while completely preventing water penetration. This material remains insoluble in water after curing. The use of nanotechnology in X100 further enhances its overall performance compared to conventional waterproofing products.

Properties and Effects of X100 Nano Waterproofing Adhesive

• High resistance to structural stresses
• Easy application using a brush or spray gun
• Temperature resistance: -50°C to +70°C
• Extended lifespan of insulation layers
• Anti-fungal, anti-algae, and antibacterial properties
• Eco-friendly, non-toxic to drinking water
• Enhanced freeze-thaw cycle resistance
• Cost-effective solution for structural waterproofing
• No peeling or flaking over time
• High resistance to UV radiation and CO₂ gas
• Excellent chemical resistance against detergents and CO₂ exposure
• Prevents shrinkage and cracking
• Ensures complete penetration into concrete structure

Applications of X100 Nano Waterproofing Adhesive

• Additive for acrylic and plastic-based paints to achieve waterproof coatings
• Incorporation into repair mortars for creating waterproof restoration materials
• Waterproofing for cement, plaster, brick, and wood surfaces without altering appearance
• Compatible with all cementitious and gypsum-based mortars
• Effective in sealing bathrooms, sanitary areas, and wet spaces up to full height
• Can be applied under both positive and negative water pressure
• Allows for thin-wall isolation layers using X100 Waterproofing Adhesive
• Ideal for waterproofing pools, reservoirs, and water treatment facilities

Physical and Chemical Specifications of X100 Nano Waterproofing (Latex-Based)

Property	Specification
Form	Viscous liquid
Color	Milky white
Density	1.1 g/cm³
Standards	ASTM D412, ASTM D624, ASTM D1149, ASTM D5963
Tensile Strength	6.5 MPa
Flexural Strength	13 MPa
Shear Strength	6 MPa
Water Absorption	Less than 2%

Consumption Rate of X100 Nano Waterproofing Adhesive

• For waterproofing paint: Mix 1 part of X100 with 3 parts of paint
• For grout mortar: Add 20% X100 by weight of the dry grout mix
• For concrete waterproofing: Mix 5-9% X100 with concrete by weight
• For cementitious waterproofing slurry: Mix 2 parts X100 per 5 kg of powder
• For direct application on surfaces: 1 kg of X100 covers 2 m² in two layers

Application Methods for X100 Nano Waterproofing Adhesive

For direct surface waterproofing (without additives):

1. Clean the surface from dust, grease, and loose particles.
2. If cracks or damaged areas exist, repair them using a suitable patching compound.
3. Apply X100 in two coats using a brush or spray gun.

For cementitious waterproofing slurry:

1. Mix 2 parts cement with 3 parts fine stone powder.
2. Blend the dry mix with 2 parts of X100 and apply.

For waterproofing paint:

• Mix 1 part X100 with 3 parts water-based acrylic paint and apply.

For grout mortar:

• Add 1 kg of X100 per 5 kg of pre-mixed grout or a cement-stone powder blend.

For concrete mixing:

• Add X100 to the concrete mixing water before combining with other components.
• Can be added to ready-mix concrete in batch plants or mixer trucks.
• Ensure at least 1-minute mixing per cubic meter of concrete.
• Never add X100 directly to dry cement powder.

Safety Considerations for X100 Nano Waterproofing Adhesive

• In case of skin or eye contact, rinse immediately with plenty of clean water.
• Do not ingest; seek medical attention if swallowed.
• This product is non-toxic and environmentally safe.

Storage Conditions for X100 Nano Waterproofing Adhesive

• Shelf life: 1 year in original sealed packaging
• Storage conditions: Keep away from freezing, excessive heat, and direct sunlight
• Optimal storage temperature: +10°C to +30°C

Packaging of X100 Nano Waterproofing (Latex-Based)

• Available in 4 kg and 20 kg containers.