Stone Antique Adhesive

Stone Antique Adhesive

Powdered Stone Adhesive

What is Powdered Stone Antique Adhesive?

A powerful and efficient adhesive based on cement and special resins.

This product is an excellent choice for installing decorative stones and is formulated with synthetic polymers and micronized mineral powders, making it suitable for attaching antique stones and bricks to vertical surfaces. The best type of adhesive for internal use, offering flexibility and ease of application, it is ideal for installing antique stones and bricks. The presence of chemical additives ensures that the adhesive remains flexible after curing, preventing cracking or breaking of antique stones and bricks due to the expansion and contraction of the building.

In general, this product is also known as bed adhesive, a type of tile adhesive used for installing natural stone tiles, especially antique stones and bricks, on vertical surfaces. This product acts as an adhesive that bonds tiles (including natural stone tiles) to surfaces or substrates. It is the primary choice for natural stone tiles due to the combination of polymers that enhance adhesion properties.

Properties & Effects

• High strength, resistance, and adhesion without volume shrinkage or cracking
• Reduces execution costs
• Maintains adhesion against moisture
• Resists temperature changes after drying
• Moisture-resistant after setting
• Easily mixable with water
• No need for additional additives
• Easy application and fast execution
• Resistant to sliding and minor structural vibrations

Applications

• Suitable for installing various artificial stones on different surfaces
• Ideal for installing stone on surfaces directly exposed to water and moisture
• Suitable for installing porcelain and granite tiles with low water absorption
• Can be used for both indoor and outdoor stone and brick installations
• Ideal for installing different coatings on cement, concrete, and stone surfaces

Consumption Rate

The consumption of powdered stone adhesive depends on the condition of the substrate (porosity and unevenness of the surface).

Application Method for Powdered Stone Antique Adhesive

How to use Powdered Stone Antique Adhesive?

• The surface must be free from dirt, dust, oil, or any contaminants.
• Spread the adhesive using a trowel on the surface.
• Mix 5 to 6 liters of water per bag of adhesive using an electric mixer.
• Gradually add the powder to the water and mix until a smooth, uniform consistency is achieved.
• Let the mortar rest for 5 minutes, and after a quick mix, it is ready for use.
• Using a notched trowel, apply the adhesive on the surface and install the tiles within 20 minutes to ensure proper bonding.

Physical & Chemical Properties of Powdered Stone Antique Adhesive

Property	Specification
Form	Powder
Color	White – Gray
Specific Gravity	1.7 gr/cm³
Workability Time	Maximum 30 minutes
Initial Set	24 hours
Final Set	7 days

 

Storage Conditions for Powdered Stone Antique Adhesive

• Shelf Life: 6 months in its original packaging
• Storage Conditions: Store away from freezing, excessive heat, and prolonged exposure to sunlight
• Ideal Storage Temperature: Between 10°C and 30°C

Safety Instructions for Powdered Stone Antique Adhesive

• This product is not toxic or hazardous to humans or the environment.
• Due to its alkaline properties, it is recommended to wear goggles and gloves while working with it.
• In case of accidental skin contact, wash immediately with soap and water.
• If it comes into contact with eyes, rinse immediately with water.

Packaging of Powdered Stone Antique Adhesive

• 20 kg bag