PROOFAB Chemical Anchoring Adhesive
P131 – Two-Component Rebar Anchor Adhesive
Product Description
The PROOFAB P131 Rebar Anchor Adhesive is a highly powerful two-component adhesive formulated with high-quality general polyester resins, designed and offered for a wide range of construction industry applications. This adhesive is extensively used in semi-heavy and medium-weight projects for both horizontal and vertical applications. Thanks to its thixotropic properties, it can even be used in vertical applications, household uses, and non-construction purposes.
This two-component adhesive consists of one part hardener and the other part resin, which enhances the durability and strength of concrete. It is widely used in reinforcement and rebar anchoring during concrete pouring in construction, significantly improving the structural resistance and load-bearing capacity of the structure. Moreover, this product is known for its high mechanical strength.
Key Features and Benefits
- Fast-setting and fully hardens after application
- High mechanical strength
- Saves time and labor
- Can be used in low temperatures
- Fills gaps completely, leaving no voids in the structure
- Volume stability over time, does not shrink
- High adhesion strength
- Suitable for rebar and bolt anchoring on both horizontal and vertical concrete surfaces
Applications
- Bonding concrete, marble, stone, and more
- Ideal for kitchen and bathroom cabinet installation
- Suitable for installation on perforated brick walls and brackets
- Applicable for industrial machinery installation and setting up satellite dishes and TV systems
- Suitable for installing decorative panels on walls and ceilings
- Ideal for radiator and plumbing system installations
- Suitable for lighting fixtures and lamp installations
- For installing railings, shelves, or other components to the main structure
- Effective in connecting concrete parts
- Suitable for filling gaps between walls and building facades
Consumption Rate
Start applying the adhesive from the deepest part of the hole. If you begin in the middle, trapped air could leave voids. If the nozzle or mixer does not reach the bottom of the hole, use a pipe or hose. Ensure that 70% of the hole is filled with rebar anchor adhesive. Make sure the concrete in the hole is free from cracks and damage.
After placing the rebar, avoid shifting it and keep it in place without applying pressure until the adhesive hardens.
Application Method
- Drill the hole using appropriate tools.
- Clean the drilled hole thoroughly, using a vacuum cleaner or brush to remove any dust and debris. This is crucial since concrete dust or debris can affect the adhesive’s performance.
- Remove any grease or oils from the surface.
- Inject the rebar anchor adhesive into the hole, filling about two-thirds of the hole’s volume.
- Clean the excess adhesive from the hole opening using a spatula or other tools. Allow it to cure completely.
Technical Details
- Consistency: Paste
- Color: Grey
- Setting Temperature: 33°C
- Specific Gravity of Resin: 1.6 gr/cm³
- Specific Gravity of Hardener: 1.46 gr/cm³
- Weight: 345 g
Safety
- Avoid direct inhalation of the product and seek medical attention if needed.
- If swallowed, do not induce vomiting; seek immediate medical help.
- In case of skin contact, wash the affected area immediately, and consult a doctor if irritation occurs.
- If the product comes into contact with eyes, rinse immediately with clean water for 15 minutes and consult a doctor.
- Use protective gloves, clothing, goggles, and face protection during application.
- This product is toxic to aquatic life and has long-lasting effects.
Storage
- Store in a well-ventilated area.
- Avoid storing in heat as this may cause pressure buildup and risk explosion.
- Shelf life: 1 year in its original packaging
- Storage conditions: Keep away from cold, freezing temperatures, heat, and direct prolonged sunlight
- Optimal storage temperature: +5°C to +30°C
Packaging
- Volume: 345 ml
- Carton: 12 cartridges per box
Reviews
There are no reviews yet.