All-Purpose Acrylic Putty
The ALL-PURPOSE ACRYLIC PUTTY is a ready-to-use, high-performance product formulated with acrylic resins, micronized mineral fillers, and special additives. It is designed for surface preparation before applying the main coat of paint, improving cracks, seams, and surface imperfections, making it ideal for use on concrete, brick, gypsum, and cement surfaces. Once dry, it forms a strong, sandable layer, providing an excellent surface for painting.
This product is used to repair fine cracks, smooth out minor surface irregularities, and fill deeper cracks in layers. It improves the quality of the subsequent paint application, increases paint coverage, and reduces the occurrence of shadows on the painted surface. As a ready-to-use product, it requires no additional water or additives and can be easily applied using a spatula or trowel. The ALL-PURPOSE ACRYLIC PUTTY is suitable for use as a base coat for various acrylic, plastic, and oil-based paints.
Putty, in general, refers to a material used to fill pores, seams, dents, and cracks. Putty work is performed as the final step in surface preparation before painting. When a wall is uneven, a large amount of paint is required to fill the pores, which can reduce the aesthetic quality of the work. Therefore, putty is essential before painting a wall.
Properties and Effects of the Acrylic All-Purpose Putty
- Easy and fast application using a spatula or trowel
- Formulated with acrylic resins
- Excellent sandability
- Prevents moisture penetration in walls
- Creates a strong surface with minimal dust during sanding
- Reduces imperfections in paint and painting
- Reduces paint consumption on surfaces
- Minimizes shadow formation after painting
- Ready to use, with no need for additional water or additives
- Does not produce strong odors due to its water-based formula
- Excellent filling and finishing properties
- Strong adhesion to surfaces
- No shrinkage or contraction after drying
- Antibacterial, antifungal, and mold-resistant
Applications of the All-Purpose Acrylic Putty
- Suitable for both interior and exterior surfaces
- Ideal for repairing and smoothing cracks and surfaces
- Essential for surface preparation before applying the main paint layer
- Ideal for filling holes and gaps in walls
- Can be used as a base for acrylic, plastic, and oil-based paints
- Effective for smoothing porous cement and sand-based surfaces
- Suitable for preparing gypsum walls
- Ideal for filling and preparing precast concrete and gypsum walls
- Perfect for repairing and restoring damaged masonry surfaces
Physical and Chemical Properties
- Physical form: Viscous paste
- Color: Creamy
- Specific weight: 1.1 gr/cm³
- pH: Approximately 8
- Solubility: In water
Consumption Rate: The consumption rate of the All-Purpose Acrylic Putty depends on the surface roughness, crack depth, and conditions such as surface hardness or softness. Under normal conditions, 1 kg of this putty covers 4-5 square meters in one layer.
Application Instructions
- The surface to be puttied must be clean, free from dust, dirt, old paint, or grease.
- For hard, non-porous surfaces, apply an acrylic primer before puttying to enhance adhesion.
- Mix the contents thoroughly.
- Apply the putty using a spatula or trowel.
- Depending on surface roughness or porosity, apply the putty in 1 or 2 layers.
- After 24 hours, sand the surface to remove any imperfections, gaps, or tool marks.
Safety
- The All-Purpose Acrylic Putty is not hazardous to humans or the environment.
- Use rubber gloves during application.
- In case of eye contact, rinse with clean water for at least 15 minutes.
- If the putty comes into contact with skin, wash off with clean water and consult a doctor if irritation occurs.
Storage
- Shelf life: 2 years in its original packaging
- Storage conditions: Keep away from cold, freezing, heat, and direct sunlight.
- Ideal storage temperature: Between +10°C and +30°C
Packaging
- 0.5 kg bucket
- 1 kg bucket
- 5 kg bucket
- 15 kg bucket
Reviews
There are no reviews yet.