Concrete Paving Stencil Model MOLD X130

Concrete Paving Stencil Model MOLD X130

Concrete Paving Stencil Model MOLD X130 is a square-shaped stencil with an outer square appearance and internal linear stiffeners. It is designed and produced with a geometric pattern consisting of four squares at the corners and four arrows in the center. The MOLD X130 concrete paving mold has an outer dimension of 40×40 cm, a height of 4 cm, and a blade thickness of 6 mm. It is made from durable ABS plastic material and can be used for paving various outdoor areas such as villa courtyards, parks, urban green spaces, garden walkways, and sidewalks. This stencil makes paving easy and requires no special skills or expertise.

Using plastic paving molds for stone paving not only simplifies the process but also allows for the use of colored mortars to create more aesthetic designs. For example, you can arrange the four surrounding squares in one color and the four central arrows in another color. The mold’s outer shape is square, with linear blades in the center, designed to be arranged next to each other from various directions to create a variety of geometric patterns.

The outer dimensions of the MOLD X130 mold are 40×40 cm, and it can be used in different directions to create diverse patterns. This plastic paving mold offers the easiest and most effective method for paving outdoor spaces compared to traditional methods like mosaic installation, concrete pouring, or using ready-made concrete pavers. It is especially advantageous for public and urban environments, including parks and green spaces, as a cost-effective and aesthetically pleasing alternative to conventional paving techniques.

Special Features of MOLD X130 Concrete Paving Stencil

• Made from durable ABS plastic, which provides high resistance to various weather conditions.
• Offers high reusability, and with proper maintenance, it can be used as a permanent tool for paving professionals.
• Resistant to impact and pressure, making it highly durable without easily breaking or cracking.
• The high-quality ABS plastic ensures minimal adhesion of cement or concrete, making it easy to clean.
• Allows for the use of different colored cement mixes in each cell for more visually appealing paving.
• Easy to clean with water and a brush without requiring harsh chemical cleaners.
• No need for surface leveling or pre-preparation before paving, making it ideal for uneven or sloped surfaces.
• Multiple molds can be used simultaneously to create various geometric designs.
• There is space between the paving cells where grass, moss, or gravel can be added to enhance the aesthetics.

How to Use MOLD X130 Paving Stencil

• Ensure the cement mix has a ratio of no less than 300, with 350 recommended for optimal results.
• Use cement or concrete with a slump of 4 to 6 to avoid issues with working time or proper hydration.
• Apply an appropriate release agent like oil or diesel to the molds before use.
• Saturate the mold’s bottom with fresh water before pouring the cement to prevent moisture absorption by the ground.
• After filling the mold with cement, use a small trowel or hand to gently tap the surface to compact and stabilize the mixture.
• Allow the mold to set for 2-3 hours, depending on weather conditions, before carefully removing the mold.
• Water the newly paved surface regularly for 3 days for curing.
• After 24-48 hours, the surface will be walkable, and it will be ready to handle heavy traffic, such as vehicles, after 7 days.

Number of Molds Needed

 The number of molds required depends on the area to be paved. The more molds available, the faster the process will be, allowing sufficient time for the cement to set properly. For smaller areas, at least 2 molds are recommended, while larger areas may require 16 or more molds to increase efficiency.