Siloxane-Based Facade Waterproofing

Siloxane-Based Facade Waterproofing

Solvent-Based Facade Protector
Nano-Based Building Facade Sealant

Building Siloxane Sealant

WPS300

Water-Repellent Facade Coating with Penetration Properties
Based on Silane-Siloxane

Nano-Based Building Facade Sealant

Solvent-Based Facade Protector: One of the most challenging issues for buildings in rainy areas or those exposed to rain is the penetration of water and moisture into the facade surface. Water absorption by the building facade can cause numerous structural problems. For example, if a storm with a speed of 32 km/h hits the building facade, it can absorb about 10 liters of water within 6 hours, while concrete surfaces can absorb up to 20 liters. To prevent water and moisture penetration through the facade and to waterproof it, a highly effective product has been formulated and manufactured based on silicon resins reinforced with nanotechnology. This waterproofing solution is an excellent protective coating for building surfaces against rain and moisture, and after application, it does not alter the color or appearance of the facade. The solvent-based silane-siloxane facade protector can be applied to various surfaces such as concrete, brick, gypsum, and cement. One of its key applications is the protection of historical and ancient structures against rain and moisture. Additionally, the use of this product facilitates easy facade cleaning.

In general, this product is a chemical substance used to protect and maintain building facades. It can penetrate deep into surfaces and prevent damage caused by environmental factors such as water, moisture, dust, pollutants, and UV radiation.

Mechanism of Action of Nano-Based Facade Sealant

How does the solvent-based facade protector work?

The solvent-based facade protector is designed and manufactured based on silane-siloxane resins reinforced with nanotechnology. After application, it penetrates the surface without leaving any visible gloss or coating. This material infiltrates the capillary pores of the surface, ensuring waterproofing.

Properties and Effects of Nano-Based Facade Sealant

What are the properties and effects of the solvent-based facade protector?

• Dust and soot resistance
• Does not block concrete breathability
• Facilitates easy facade cleaning
• Protects the color of applied surfaces
• Provides high resistance to water and moisture penetration
• Based on nanotechnology
• Excellent resistance to atmospheric pollutants
• High durability against chemical agents and chloride ions
• Long-lasting performance on applied surfaces
• Self-cleaning properties after rain
• UV resistance
• Suitable for both old and new surfaces
• Easy application on various surfaces
• Does not form a film on the surface

Applications of Nano-Based Facade Sealant

What are the major applications of the solvent-based facade protector?

• Waterproofing gypsum panels
• Waterproofing all concrete, gypsum, brick, and stone surfaces
• Protecting historical and ancient structures against weathering factors
• Compatible for waterproofing fiber cement roofs
• Effective for waterproofing surfaces covered with artificial stone
• Suitable for protecting building facades from water and moisture

Physical and Chemical Properties of Facade Waterproofing

Property	Specification
State	Liquid
Color	Colorless
Specific Gravity	1.02 gr/cm³
Standard	ASTM D5095, ASTM D6489, ASTM E514
Chloride Ion	None
Solubility	In water
pH	Approximately 7

Consumption Rate of Nano-Based Facade Sealant

What is the standard consumption rate of the solvent-based facade protector?

The consumption rate of the facade protector depends on the type of surface, porosity level, and absorption rate. Under normal conditions, 1 liter of the product is sufficient to cover 4 to 5 square meters of surface in one layer.

Application Method of Nano-Based Facade Sealant

How to properly apply the solvent-based facade protector?

• The target surfaces for waterproofing must be completely clean, free from dust, grease, and any contamination.
• If contamination exists, clean the surface using water pressure (water jet) or sandblasting.
• Apply the facade protector using a brush or spray.

Safety Measures for Nano-Based Facade Sealant

What are the safety precautions for the solvent-based facade protector?

• In case of accidental contact with eyes, immediately rinse with water for 2 minutes.
• Always wear protective goggles and a mask during application.
• Use appropriate safety gloves and a mask while applying the product.
• This facade waterproofing solution is not classified as toxic or environmentally hazardous.

Storage of Solvent-Based Facade Protector

• Shelf life: One year in the original packaging
• Storage conditions: Keep away from extreme cold, frost, excessive heat, and prolonged direct sunlight.
• Recommended storage temperature: Between +10°C and +30°C

Packaging of Facade Waterproofing

• 4-liter gallon
• 20-liter gallon