Tile Joint Filler Boxed

Tile Joint Filler Boxed

In many cases, leaks between the joints of tiles and ceramics occur due to the washing of grout with water or acidic cleaners. In such cases, the Tile Joint Filler Boxed can be a great help in solving the problem, as it allows for re-grouting the joints, fully sealing them and ensuring they are waterproof.

To use the filler, first, the old and deteriorated grout should be scraped out using a sharp tool, clearing the gaps completely. Then, the joints should be thoroughly cleaned using water or compressed air. Afterward, apply the contents of the Tile Joint Filler Boxed and smooth it using a spatula.

One of the packaging options for the Tile Joint Filler Boxed is the box packaging, which contains 1 tube with a needle nozzle and two special spatulas. A total of 24 pieces of the Tile Joint Filler Boxed are packed into one carton. This advanced technology, used in tile and ceramic joint repair, is formulated and produced with the highest quality in tube and luxury packaging. The boxed packaging option is more economical compared to other packaging types. However, this packaging type is only available for white-colored fillers, as the color of the tube inside the box cannot be seen.

Generally, the Tile Joint Filler Boxed is a highly effective solution to prevent cracks and gaps in walls, ceramics, tiles, and more. It is widely used for sealing joints and gaps in buildings. This product can fill and seal all joints and gaps between tiles, ceramics, and mosaics.

Consumption Rate: The consumption rate of the Tile Joint Filler Boxed depends on the dimensions and shape of the joint. For a 3×3 mm joint with a beveled shape, one 250g tube of Tile Joint Filler Boxed is sufficient for 5 to 7 meters. The consumption rate may vary with different joint dimensions and shapes.

Application Method: All tubes of Tile Joint Filler Boxed include one 250g tube of filler, one needle nozzle, and two special spatulas.

Before using the filler, prepare the joints and gaps on the surface. Using a cutter, cut the needle nozzle according to the required joint width. Open the tube and attach the needle nozzle. By applying pressure, the contents will be dispensed through the nozzle and onto the joint. Use the spatula to smooth and level the surface.

After applying the filler, smooth it using the spatula and clean the surface with an absorbent cloth.

Storage: Shelf Life: 1 year in the original packaging
Storage Conditions: Keep away from cold, frost, heat, and prolonged direct sunlight
Ideal Storage Temperature: 10°C to 30°C

Packaging

250g Tube.